UTM7070
The UTM7070 is a Push-Pull tube output transformer, 8kCT 4Ω, 8Ω and 16Ω. Recommended for EL84-based amplifiers. Ungapped.
Description
For use in a high performance valve amplifier, where high output level and exceptional bandwidth are required. Designed for use with Push-Pull output stage or an AC coupled cathode follower or SRPP circuit driving a nominal 4Ω, 8Ω, and 16Ω speakers. Dedicated to the EL84 power amplifiers. Ungapped.
Impedance: 8k:4Ω, 8k:8Ω, or 8k:16Ω
Wattage: 45W
Cathode feedback: No
Winding Configuration:Â Interleave Winding
Frequency response @50Ω source, 600Ω load: +/- 0.5 dB 14 Hz to 80 kHz (Ap)
Max primary DC per side: 60mA
Primary Inductance: 100H @100Hz
Secondary Inductance: 200/400/700mH @100Hz
Total DC Resistance PRI: 340Ω
Total DC Resistance SEC: 1Ω
THD+Noise: <0.1% @ 1K Hz
Core Size: EI86, stock 42mm, Z11 Grain Oriented lamination steel. Ungapped.
Bell-style package.
Weight: 2kg
Related products
UTM3575
The UTM3575 is a line-level, output transformer, 76k:600Ω, 11.2:1 ratio. Recommended as a Telefunken V72 replacement (CT V72/2). It’s equipped with 150mm color leads.
UTM7135
The UTM7135 is a 3.5k to 2Ω, 4Ω or 8Ω tube output amorphous transformer. Recommended for A-Class 300B-based amplifiers (Single Ended circuits).
UTM3504
The UTM3504 is a line-level, low-profile output GAPPED transformer, 600Ω:600Ω:600Ω:FB (1:1:1:FB). Dedicated for UREI 1176, rev A-E. Suitable for 500-series modules.
UTM7077
The UTM7077 is a Push-Pull tube output transformer, 6.2kCT 4Ω, 8Ω and 16Ω + Cathode NF. Recommended for a Sansui AU70 amplifier. Ungapped.
UTM7071
The UTM7071 is a Push-Pull tube output nanocrystalline core transformer, 8kCT 4Ω, 8Ω and 16Ω. Recommended for EL84-based amplifiers. Ungapped.
