UTM7074
The UTM7077 NANO is a Push-Pull tube output transformer, 6.2kCT 4Ω, 8Ω and 16Ω + Cathode NF. Recommended for a Sansui AU70 amplifier. Ungapped.
Description
For use in a high performance valve amplifier, where high output level and exceptional bandwidth are required. Designed for use with Push-Pull output stage or an AC coupled cathode follower or SRPP circuit driving a nominal 4Ω, 8Ω, and 16Ω speakers. Dedicated to Sansui AU70 power amplifier with the negative cathode feedback circuit.
Impedance: 6.2k:4Ω, 6.2k:8Ω, or 6.2k:16Ω
Wattage: 45W
Cathode feedback: yes
Winding Configuration:Â Interleave Winding
Frequency response @50Ω source, 8Ω load: +/- 0.5 dB 14 Hz to 90 kHz (Ap)
Max primary DC per side: 60mA
Primary Inductance: 240H @100Hz
Secondary Inductance: 200/400/700mH @100Hz
Total DC Resistance PRI: 160+160Ω
Total DC Resistance SEC: 1Ω
THD+Noise: <0.1% @ 1K Hz
Core Size: About EI86, stock 40mm, 12cm2, Nanocrystal double C core. Ungapped.
Double C package.
Weight: 2kg
Related products
UTM7250
The UTM7250 is an Ultralinear, Push-Pull tube output transformer, 5kCT to 4Ω, 8Ω and 16Ω. Recommended for an ATM-1 amplifier. Ungapped.
UTM3580
The UTM3580 is a Push-Pull tube output transformer, 15kCT:600, 10:1, 5:1, or 2.5:1 ratio. Recommended for a vari mu output circuit like Altec 436. Open frame package.
UTM3504
The UTM3504 is a line-level, low-profile output GAPPED transformer, 600Ω:600Ω:600Ω:FB (1:1:1:FB). Dedicated for UREI 1176, rev A-E. Suitable for 500-series modules.
UTM3501
The UTM3501 is a line-level, low-profile output transformer, 150Ω:600Ω, 1:2 ratio. Recommended for any kind of API-ish style output amplifiers. PCB mounted
