UTM7250
The UTM7250 is an Ultralinear, Push-Pull tube output transformer, 5kCT to 4Ω, 8Ω and 16Ω. Recommended for an ATM-1 amplifier. Ungapped.
Description
For use in a high performance valve amplifier, where high output level and exceptional bandwidth are required. Designed for use with Push-Pull, Ultralinear output stage driving a nominal 4Ω, 8Ω, and 16Ω speakers. Dedicated to ATM-1 power amplifier.
Impedance: 5k:4Ω, 5k:8Ω, or 5k:16Ω
Wattage: 45W
Cathode feedback: no
Winding Configuration:Â Interleave Winding
Frequency response @50Ω source, 8Ω load: +/- 0.2 dB 14 Hz to 80 kHz (Ap)
Primary Inductance: 42H @100Hz
Secondary Inductance: 200/400/700mH @100Hz
Total DC Resistance PRI: 78+78Ω
Total DC Resistance SEC: <0.7Ω
THD+Noise: <0.01% @ 1K Hz
Core Size: EI86, stock 46mm, 13.5cm2, Z11 Grain Oriented lamination steel. Ungapped.
Bell-style package.
Weight: 2kg
Downloads
Related products
UTM3502
The UTM3502 is a line-level, output GAPPED transformer, 600Ω:600Ω:600Ω:FB (1:1:1:FB). Dedicated for UREI 1176, rev A-E.
UTM3590
The UTM3590 is a Single Ended tube output transformer, 9.6k:600, 8:1, 4:1 or 2:1 ratio. GAPPED. Recommended for tube preamp projects like RCA BA-2C. Clamped and open frame option available.
UTM7070
The UTM7070 is a Push-Pull tube output transformer, 8kCT 4Ω, 8Ω and 16Ω. Recommended for EL84-based amplifiers. Ungapped.
UTM3505
The UTM3505 is a line-level, low-profile, output UNGAPPED transformer, 300Ω:600Ω (1:2). Dedicated for UREI 1176, rev F-H, including Gyraf’s project. Fits in 500-series modules.
UTM3556
The UTM3556 is a line-level, low-profile output transformer, 75Ω:600Ω, 1:3 ratio. Carnhill VTB9056 direct replacement.
Recommended for any kind of NEVE-ish outputs.
