UTM3580
The UTM3580 is a Push-Pull tube output transformer, 15kCT:600, 10:1, 5:1, or 2.5:1 ratio. Recommended for a vari mu output circuit like Altec 436. Open frame package.
Description
For use in a high performance valve compressor/amplifier etc where high output level and exceptional bandwidth are required. Designed for use with Push-Pull output stage or an AC coupled cathode follower or SRPP circuit driving a nominal 600Ω line. Can be configured for low output impedance (10:1) or high level output (5:1) by connecting the twin secondary windings in parallel or series.
Ratio: 5:1 or 10:1
Impedance: 15k:600Ω or 15k:150Ω
Frequency response @50Ω source, 600k load: +/- 0.5 dB 15 Hz to 30 kHz (Ap)
Max primary DC per side: 33mA
Primary Inductance: 120H @100Hz
Total DC Resistance PRI: 370Ω
Total DC Resistance SEC: 40Ω
Max Level: @50Hz: +36 dBu
Core Size: EI57, Z11 Oriented steel.
Open frame pacakge.
Related products
UTM3556
The UTM3556 is a line-level, low-profile output transformer, 75Ω:600Ω, 1:3 ratio. Carnhill VTB9056 direct replacement.
Recommended for any kind of NEVE-ish outputs.
UTM7071
The UTM7071 is a Push-Pull tube output nanocrystalline core transformer, 8kCT 4Ω, 8Ω and 16Ω. Recommended for EL84-based amplifiers. Ungapped.
UTM3515
The UTM3515 is a tube output transformer, 15k:600, 5:1 ratio. Suitable for the LA2A or REDD output transformer. It’s equipped with 150mm color leads.
UTM3523
The UTM3523 is a line-level, output transformer, 75Ω(1:1), 300Ω(1:2).
Recommended for any kind of API-ish output amplifiers.
UTM3575
The UTM3575 is a line-level, output transformer, 76k:600Ω, 11.2:1 ratio. Recommended as a Telefunken V72 replacement (CT V72/2). It’s equipped with 150mm color leads.
